Download the patch for Windows 8 from here: x64 x86
Edit (2014-02-06): Uploaded x64 & x86 patches for Windows 8.1.This time I have uploaded only the patches – you can find the installers in the previous links. The installation procedure is almost the same except this time you have to reboot.
Lenovo has only released a ThinkPad version of Active Protection System for Windows 8 (Version 220.127.116.11).
The latest version available for IdeaPad S205 on Lenovo Support (Version 1.70.11, Windows 7) is not compatible with Windows 8 (it crashes immediately due to compatibility issues).
Fortunately, I’ve found a way to run the APS on this netbook (and probably on other unsupported devices as well) by combining these two versions.
It turned out that the .cpl (Control Panel Extension) was the non-working module. I hope that Lenovo will release a proper, fixed version. Until then, here is a quick installation guide:
1. Run the APS 1.70.11 installer.
Select English when asked for language. Don’t change the default installation folder.
It isn’t necessary to reboot.
2. Run patch.bat
4. Check Lenovo – Airbag Protection in Control Panel.
Supported devices (according to S205 Support page)
Lenovo B470, B570, V370, V470, V570, IdeaPad S205
If you haven’t already seen it, check out this tutorial to play a small game using the accelerometer driver 🙂
My previous tutorial is still available here but this one is a lot easier thanks to the new features introduced in Serva 2.1.
Router: you can connect your computers directly if you have an Ethernet crossover cable, but you have to configure your server differently.
Computer with Windows installed: you can use any computer-OS combination as a PXE Server as long as it has a TFTP software (even your smartphone can be a server :)). In this tutorial I’m going to use a Windows 7 PC with Serva because I think this configuration would suit the S205 owners the best. There is an alternative TFTP software for Windows called TFTPD which is more popular than Serva but in my opinion also harder to set up.
Ubuntu CD/DVD:download the latest desktop version of Ubuntu from the official website.
(!) You should temporarily disable your firewall to avoid potential conflicts.
Downloadand extract Serva to a folder (e.g.C:\Serva_Non-Supporter_64_v2.1.0). Choose the appropriate Serva version based on the Ubuntu edition you are about to install (x64 – 64 bit, x86 – 32 bit). I recommend installing the x64 edition of Ubuntu, see a comparison here) . Use the selected architecture consistently throughout this tutorial.
Create a root folder for Serva (e.g.C:\SERVA_ROOT).
Run Serva and click on the Settings button at the bottom.
On TFTP tab tick TFTP server and select the TFTP Server root directory you have created in the previous step (in my caseC:\SERVA_ROOT).
Click on the DHCP tab, set proxyDHCP and make sure that the BINL box ischecked.
Save your settings and restart Serva.
In your root directory you should see some files that Serva has created. Right click on the NWA_PXE folder and select properties. On the Sharing tab select Advanced sharing. Tick Share folder and set the Share name to NWA_PXE_SHARE.
Create a subfolder under NWA_PXE. You can name it freely (e.g. UBUNTU_12_10_X64_LIVE). Copy the contents of the downloaded Ubuntu iso into this folder and create a ServaAsset.inf file (you can use Notepad) with the following content:
;-Serva v2.1 Non-Windows Asset Information File
; Ubuntu 12.10 Live
; \NWA_PXE\ offered as MS share NWA_PXE_SHARE user=serva password=avres
; When installed on a real PC there are not passwords asked
; When installed on VMWare a password is first asked (text mode); just hit enter
; The GUI asks for user=ubuntu with empty password.
asset = Ubuntu 12.10 Live
platform = x64
kernel = NWA_PXE/$HEAD_DIR$/casper/vmlinuz
append = showmounts toram root=/dev/cifs initrd=NWA_PXE/$HEAD_DIR$/casper/initrd.lz boot=casper netboot=cifs nfsroot=//$IP_BSRV$/NWA_PXE_SHARE/$HEAD_DIR$ NFSOPTS=-ouser=YOUR USER NAME,pass=YOUR PASSWORD,ro ip=dhcp ro
The non-static fields are asset (you can name it freely), platform (x86/x64), user and pass (your Windows account is needed to access the shared folder) and the intitial ram disk file (Ubuntu 12.10 – initrd.lz, Ubuntu 12.04 – INITRD_N02.GZ which you have to download into the appropriate folder). Your file should look similar to this:
Restart Serva for the last time.
Start your s205 and press Fn+F11 to enter the Boot Menu. Select the PCI LAN: Realtek PXE option. If your settings are correct, after a few seconds you should see Serva’s Install Menuwith the Ubuntu option. Press Enter to continue. Ubuntu will be loaded into the memory (it takes a few minutes).
UbuntuLive will start with the nice Unity look and a dedicated Ubuntu installer icon. That’s it. If you want to use both Windows and Ubuntu on your S205 make sure you’ve read my tutorial on Dual-Booting before you proceed with the installation.
With the new series of ThinkPads IBM introduced the Active Protection System (APS) in 2003. The APS is a protection system for the ThinkPad’s internal harddrive. A sensor inside the ThinkPad recognizes when the notebook is accelerated. A software applet then is triggered to park the harddisk. This way the risk of data loss in case of when the notebook is dropped is significantly reduced since the read/write head of the harddrive is parked and hence can’t crash onto the platter when the notebook drops onto the floor.
The hardware sensor is capable of not only recognizing acceleration of the notebook, but also (to a certain degree) of its whole orientation in space, relative to gravity’s axis. Furthermore, having the actual control put into software, its functionality is extendable and it gives chance to implement features like the “ignore minor shocks” feature which is present in the Windows based control applet. (This feature prevents the harddrive from parking in case of minor regular shocks such as occur when in a train or car.)
I’ve created this post to provide you the latest Windows 8 Drivers. Since Lenovo doesn’t support Windows 8 on our device, these drivers are either taken directly from the vendors or from other Lenovo notebooks’ official support. The plan is to update this page regularly so it would function as an unofficial S205 – Windows 8 support page. I’m going to upload the drivers to Google Drive as well.
I’ve created a public Google Drive folder for the Lenovo S205 Drivers. The main advantage is that now you will be able download all the drivers as a single .zip archive. Also, the download speed should be better than the official Lenovo site’s.
I can’t garantee that I’ll update the drivers as soon as they are released (I don’t have enough time and bandwith) but I’d be glad to give edit rights to anyone willing to contribute to this project.
If you’ve installed your operation systems correctly, then both Windows and Ubuntu will support the stand-by and hibernation functions.
In the latest Ubuntu (12.04, Precise Pangolin) you have to enable hibernation manually.
To test whether hibernation is working, open a Terminal and run the following command:
If Ubuntu powered down and on restart resumed the previous state correctly, then hibernation works. When Ubuntu prepares hibernation it may display error massages (like bluetooth, rt2800pci – wifi) for a short time, but it’s all good as long as it restarts properly.
Open a Terminal and execute the following command: