Tip – Enable Hibernation in Ubuntu 12.04

If you’ve installed your operation systems correctly, then both Windows and Ubuntu will support the stand-by and hibernation functions.

In the latest Ubuntu (12.04, Precise Pangolin) you have to enable hibernation manually.

  • To test whether hibernation is working, open a Terminal and run the following command:

    sudo pm-hibernate

  • If Ubuntu powered down and on restart resumed the previous state correctly, then hibernation works. When Ubuntu prepares hibernation it may display error massages (like bluetooth, rt2800pci – wifi) for a short time,  but it’s all good as long as it restarts properly.
  • Open a Terminal and execute the following command:

    sudo gedit /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla

  • Paste this text into the file:

    [Re-enable hibernate by default]

  • Save the file and close gedit.
  • After reboot, you’ll be able to use the hibernate option from the system menu.

Source: Ubuntu-Help

Install Ralink WiFi driver correctly under Windows 7 (+ fix any WiFi-related problem)

Attention: this tip is only for devices with a Ralink RT3090 WiFi adapter. If you are unsure whether you have a Ralink card,  you can check it via Lenovo’s Product Configuration. If it doesn’t show a ‘Cbt RT3090 MOW M PCIE NB HMC WLAN’ entry, then this tutorial is not for you. UPDATE: you can use this small piece of software (modified from Lenovo installer) instead 🙂

The obvious way of installing the WiFi driver would be getting it from the official Lenovo support, but since it isn’t available there (WTF Lenovo?), the only place you can download it from is the manufacturer’s support page. If the provided link wouldn’t work navigate to Ralinktech.com > Support > Windows and look for RT309x. The latest version is (04/12/2012).

Make sure that you tick the ‘install driver only’ option when you run the setup file.

Go to Device Manager >Network adapters and double click Ralink RT3090 802.11n WiFi Adapter. Switch to the Advanced tab and select ‘Continuously Aware Mode (CAM)‘ as Power Save mode. Go to the Energy management tab and untick ‘Allow computer to turn off this device to save energy’.

Save the settings and restart your computer. These options will ensure the maximum performance and connectivity for your Ralink wireless card.

Sources: ValueTheory (Lenovo Community), Intel

%d bloggers like this: